TFS Anvils are cast ductile iron and heat treated to exact specifications and hand finished in their shop, ensuring that all of their anvils are of the highest quality. All anvils have a 1" Hardie hole and 1/2" Pritchel hole.

100lb anvil: 
Face:  4" x 14"
Horn: 4” x 9"
Height: 8.5“
Base:  7.75“ x 11”

150lb anvil:
Face:  4” x 16.5“
Horn:  4” x 10"
Height: 10"
Base:  8” x 11.75”

200lb anvil:
Face:  4.75” x 18.25"
Horn:  4.75” x 11.25"
Height: 10.75”
Base:  8.25“ x 11.75”

300lb anvil:
Face:  5.25” x 19.75”
Horn:  5.25” x 12"
Height: 12"
Base:  10" x 12.75”

TFS has been manufacturing quality anvils for both farriers and blacksmiths for several decades. TFS anvils made from ductile iron, heat treated to exact specifications and then hand finished. The TFS anvils that weigh 150 lbs. and less are hardened to 50 Rockwell. All TFS Farrier ancils have a 1" Hardie hole and a 1/2" pritchel hole.

70lb anvil:

• Face:  3.5" x 12.25"
• Horn:  3.5" x 9"
• Height:  7.75"
• Base:  8.5" x 9.5"

100lb anvil:

• Face:  4" x 16.75"
• Horn:  4" x 10.75"
• Height:  9"
• Base:  9" x 11"

125lb anvil:

• Face:  4" x 17"
• Horn:  4" x 11"
• Height:  10.75"
• Base:  8" x 10.75"

TFS has been manufacturing quality anvils for both farriers and blacksmiths for several decades. TFS anvils made from ductile iron, heat treated to exact specifications and then hand finished. The TFS anvils that weigh 150 lbs. and less are hardened to 50 Rockwell.

• Face:  5" x 12-1/4"
• Round Horn:  4-3/8" x 8-5/8"
• Overall Length:  22"
• Height:  9-1/2"
• Base:  9" x 9"
• Weight: 105lbs

TFS has been manufacturing quality anvils for both farriers and blacksmiths for several decades. TFS anvils made from ductile iron, heat treated to exact specifications and then hand finished. The TFS anvils that weigh 150 lbs. and less are hardened to 50 Rockwell.

• Face:  4" x 10.75"
• Horn:  4" x 8.25"
• Height:  8"
• Base:  9.25" x 11"

TFS has been manufacturing quality anvils for both farriers and blacksmiths for several decades. TFS anvils made from ductile iron, heat treated to exact specifications and then hand finished. TFS anvils that weigh over 150 lbs. are hardened to 48 Rockwell. Smithy Special anvils have a 1" Hardie hole & 7/8" round hole.

200lb anvil:

• Face 5" x 21"
• Horn 5" x 9"
• Height 10.25"
• Base 9.5" x 12.75"

400lb anvil:

• Face 6.5" x 25.5"
• Horn 6" x 12"
• Height 13.25"
• Base 12.75" x 13.75"

TFS has been manufacturing quality anvils for both farriers and blacksmiths for several decades. TFS anvils made from ductile iron, heat treated to exact specifications and then hand finished. The TFS anvils that weigh 150 lbs. and less are hardened to 50 Rockwell 

• Face 4" x 17"
• Horn 4" x 9.25"
• Height 8.5"
• Base 7.75" x 11"