The VANVIL, developed by English blacksmith Chris Powell, is an essential tool for back-friendly anvil work directly from the car. This makes heavy lifting and maneuvering from the car a thing of the past. The VANVIL anvil lifter is securely anchored to the rail. To work, the rail is simply folded down, the anvil is pulled forward on the carriage, locked into place, and the base is secured and positioned. When folded, the base is held in place by a powerful magnet.

The VANVIL is suitable for all vehicles with a minimum loading area height of 19.7 in (50 cm) and a maximum loading area height of 23.6 in (60 cm).

TFS Anvils are cast ductile iron and heat treated to exact specifications and hand finished in their shop, ensuring that all of their anvils are of the highest quality. All anvils have a 1" Hardie hole and 1/2" Pritchel hole.

100lb anvil: 
Face:  4" x 14"
Horn: 4” x 9"
Height: 8.5“
Base:  7.75“ x 11”

150lb anvil:
Face:  4” x 16.5“
Horn:  4” x 10"
Height: 10"
Base:  8” x 11.75”

200lb anvil:
Face:  4.75” x 18.25"
Horn:  4.75” x 11.25"
Height: 10.75”
Base:  8.25“ x 11.75”

300lb anvil:
Face:  5.25” x 19.75”
Horn:  5.25” x 12"
Height: 12"
Base:  10" x 12.75”

TFS has been manufacturing quality anvils for both farriers and blacksmiths for several decades. TFS anvils made from ductile iron, heat treated to exact specifications and then hand finished. The TFS anvils that weigh 150 lbs. and less are hardened to 50 Rockwell. All TFS Farrier ancils have a 1" Hardie hole and a 1/2" pritchel hole.

70lb anvil:

• Face:  3.5" x 12.25"
• Horn:  3.5" x 9"
• Height:  7.75"
• Base:  8.5" x 9.5"

100lb anvil:

• Face:  4" x 16.75"
• Horn:  4" x 10.75"
• Height:  9"
• Base:  9" x 11"

125lb anvil:

• Face:  4" x 17"
• Horn:  4" x 11"
• Height:  10.75"
• Base:  8" x 10.75"

TFS has been manufacturing quality anvils for both farriers and blacksmiths for several decades. TFS anvils made from ductile iron, heat treated to exact specifications and then hand finished. The TFS anvils that weigh 150 lbs. and less are hardened to 50 Rockwell.

• Face:  5" x 12-1/4"
• Round Horn:  4-3/8" x 8-5/8"
• Overall Length:  22"
• Height:  9-1/2"
• Base:  9" x 9"
• Weight: 105lbs

TFS has been manufacturing quality anvils for both farriers and blacksmiths for several decades. TFS anvils made from ductile iron, heat treated to exact specifications and then hand finished. The TFS anvils that weigh 150 lbs. and less are hardened to 50 Rockwell.

• Face:  4" x 10.75"
• Horn:  4" x 8.25"
• Height:  8"
• Base:  9.25" x 11"

The Emerson Traditional 100lb anvil with Cams was designed by Dilton Emerson. Emerson anvils are known for their unique hardness and durability. They are all poured at an ISO certified foundry and made from 4140 tool steel. The base and face are milled and then the whole anvil is heat treated (through-hardened) to 48-50C Rockwell. This provides the strength, toughness, durability, and the lifetime of workability the Emerson anvils are known to deliver. The inclusion of turning cams makes this anvil particularly versatile for a wide range of metalworking tasks, from intricate detailing to heavy-duty forging.

100% MADE IN THE USA

Temporarily Out of Stock

The JHM Certifier anvil is one of the most popular of the farrier anvils. JHM produces some of the highest quality anvils on the market today. Made of ductile iron, machined and heat treated in the USA. This anvil has a 3" tapered heel and turning cams for bending steel.

The NC Tool Basic anvil features turning cams, a square cliphorn, and a thin heel design which allows hooking and turning of shoe heels through the hardie hole for better fit with less stress on your wrist.

The NC Tool Short Sugar anvil is perfectly balanced for the modern farrier and a wide range of disciplines. It features turning cams, a thin heel design, a square cliphorn, and a 1″ hardie hole in horn. The heel has a 1-1/4″ chamfered, round turning hole and pritchel hole.